Posts Tagged ‘blade switch’

Creating Logical Networks and Services with VMware NSX on Dell Infrastructure

Thursday, October 16th, 2014

If you haven’t already, please checkout the Dell-VMware NSX Reference Architecture (RA) whitepaper. In the reference architecture I explain in detail the foundational NSX-vSphere components and also how Dell can provide a complete end-to-end infrastructure (servers, networking, storage) to support a robust SDN solution with NSX. In this blog, I will provide a quick overview, some insight on NSX, and examples of VMware NSX deployment with a complete end-to-end Dell infrastructure. (more…)

Twitt

Stacking the Dell MXL Blade Switch

Friday, April 5th, 2013

Dell MXL blade switch

Dell MXL blade switch

The Data Center Bridging (DCB) enabled Dell MXL blade switch provides a 1/10/40GbE upstream solution for the Dell PowerEdge M1000e chassis. It comes with two fixed 40 GbE ports but is scalable up to six 40GbE ports via 40GbE FlexIO modules; this provides a total of twenty four 10GbE ports from a single blade switch using breakout cables. Other FlexIO modules available for the two FlexIO ports are a 4 port 10GbaseT module and a 4 port 10GbE SFP+ module. One Dell MXL switch can provide up to 32 line-rate 10GbE internal-facing ports for Dell blade servers. Additionally, using the 40GbE ports, 6 MXL blade switches can be stacked together. In this blog I will demonstrate how to stack 2 Dell MXL blades together. (more…)

Twitt

Connecting Dell PowerEdge M I/O Aggregator with Dell Force10 S4810 and Cisco Nexus 5548UP

Monday, February 11th, 2013

Dell PowerEdge M I/O AggregatorThe Dell PowerEdge M I//O Aggregator is a slick blade switch that plugs into the Dell PowerEdge M1000e chassis and requires barely any configuration/networking knowledge. Think of it as an advanced layer 2 switch that provides expandable uplink connectivity. The base blade comes with 2 x 40 GbE ports that by default are configured as 8 x 10 GbE ports. If desired, these ports can also be used as 40 GbE stacking ports. The Dell PowerEdge M I/O Aggregator also provide 32 internal 10 GbE connections for Dell blade servers you can install in the Dell PowerEdge M1000e chassis. If quarter-height blade servers are used, the M1000e can support up to 32 servers. This is pretty cool, not only in terms of functionality, but also in terms of the consolidation and the mess of Ethernet/power cables avoided by not using standalone components. (more…)

Twitt