Category Archives: Labs

Deploying a Dell PowerEdge M1000e Chassis with Dell Blade Servers and Dell MXL Blade Switches

Posted on June 10, 2013 by Humair

In this blog I demonstrate how to setup a Dell M1000e chassis with a Dell PowerEdge M620 server and two Dell MXL blade switches [FTOS 8.3.16.2]. The Dell M1000e chassis is part of a larger network composed of three Dell … Continue reading →

Posted in Dell, Labs, Network Architecture, Networking, Technology, Windows Server 2008 R2 | Tagged 57810S CNA, Broadcom, Broadcom 57810, Broadcom 57810S, Broadcom 57810S CNA, Broadcom CNA, Dell, Dell Force10 MXL, Dell Force10 S4810, Dell M1000e, Dell M1000e chassis, Dell M1000e PowerEdge chassis, Dell MXL, Dell MXL Blade Switch, Dell MXL switch, Dell S4810, Dell S4810 switch, Force10 MXL, Force10 Networks MXL, Force10 Networks S4810, Force10 S4810, M620 server, Open Shortest Path First, OSPF, PowerEdge, PowerEdge M620, PowerEdge M620 server, PowerEdge server, S4810 switch, server, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 R2 Enterprise | 2 Comments

Dell Networking S5000: Deployment of a Converged Infrastructure with FCoE

Posted on June 7, 2013 by Humair

Checkout my latest Dell Networking document and learn how to deploy FCoE using the Dell S5000 converged switch: “Dell Networking S5000: Deployment of a Converged Infrastructure with FCoE“.

Posted in Brocade, Dell, Dell Compellent, Fibre Channel, Labs, Network Architecture, Networking, Protocols, Storage, Technology | Tagged Brocade, Compellent, Compellent SC220, Compellent SC8000, converged infrastructure, converged network, converged networks, Dell Compellent SC220, Dell Compellent SC8000, Dell Force10 S5000, Dell Networking S5000, Dell S5000, Dell S5000 configuration, Dell S5000 converged switch, Ethernet-FC bridge, FC, FC Switch, FCF, FCoE, FCoE-FC Bridge, Fibre Channel Forwarder, Fibre Channel over Ethernet, Fibre Channel switch, Froce10 S5000, N_Port_ID Virtualization, NPIV, NPIV Proxy Gateway, S5000, S5000 configuration, S5000 converged switch, SC220, SC8000 | 6 Comments

Dell Networking S5000: The Building Blocks of Unified Fabric and LAN/SAN Convergence

Posted on June 4, 2013 by Humair

Check out my latest Dell Networking whitepaper: Dell Networking S5000: The Building Blocks of Unified Fabric and LAN/SAN Convergence. The whitepaper demonstrates and explains the movement from a traditional non-converged LAN/SAN network to a converged LAN/SAN infrastructure and how the … Continue reading →

Posted in Brocade, Dell, Dell Compellent, Fibre Channel, Labs, Network Architecture, Networking, Protocols, Storage, Technology | Tagged _Port_ID Virtualization, Brocade, Compellent, Compellent SC220, Compellent SC8000, converged infrastructure, converged network, converged networks, Dell Compellent, Dell Compellent SC220, Dell Compellent SC8000, Dell Force10 S5000, Dell Networking S5000, Dell S5000, Dell S5000 converged switch, Ethernet-FC bridge, FC, FC Switch, FCF, FCoE, FCoE-FC Bridge, Fibre Channel Forwarder, Fibre Channel over Ethernet, Fibre Channel switch, Froce10 S5000, NPIV, NPIV Proxy Gateway, S5000, S5000 converged switch, SC220, SC8000 | Leave a comment

Stacking the Dell MXL Blade Switch

Posted on April 5, 2013 by Humair

The Data Center Bridging (DCB) enabled Dell MXL blade switch provides a 1/10/40GbE upstream solution for the Dell PowerEdge M1000e chassis. It comes with two fixed 40 GbE ports but is scalable up to six 40GbE ports via 40GbE FlexIO … Continue reading →

Posted in Dell, Labs, Network Architecture, Networking | Tagged blade switch, Dell, Dell FlexIO modules, Dell Force10 MXL, Dell Force10 MXL switch, Dell M1000e, Dell M1000e chassis, Dell M1000e FlexIO modules, Dell MXL, Dell MXL Blade Switch, Dell MXL stack, Dell PowerEdge M1000e, Dell PowerEdge M1000e chassis, Dell PowerEdge M1000e FlexIO modules, FlexIO modules, Force10 MXL, Force10 MXL switch, Force10 Stack, FTOS, M1000e chassis, M1000e FlexIO modules, MXL, MXL stack, PowerEdge M1000e chassis, redundancy, stack MXL, stack MXL switches, stacking MXL, stacking redundancy | 7 Comments

Dell Bare Metal Provisioning 3.0 Demo [Video]

Posted on March 6, 2013 by Humair

In my last blog post, I discussed Dell’s Bare Metal Provisioning 3.0 (BMP 3.0) technology that just rolled out in the release of FTOS 9.1 for Dell S4810 and Dell Z9000. Well now you can see BMP in action. Just … Continue reading →

Posted in Dell, Dell Force10, Expect, Labs, Network Architecture, Networking, Programming Languages, Tcl | Tagged Automating the Network, Bare Metal Provisioning 3.0, Bare Metal Provisioning 3.0 Demo, Bare Metal Provisioning Demo, BMP, BMP 3.0, BMP 3.0 Demo, BMP 3.0 Demo Video, BMP demo, BMP Demo Video, BMP whitepaper, BMP whitepaper scripts, Dell Bare Metal Provisioning, Dell Bare Metal Provisioning 3.0, Dell BMP, Dell BMP 3.0, Expect, FTOS 9.1, script, scripts, Tcl | Leave a comment

Dell Bare Metal Provisioning 3.0 – Automate the Network

Posted on March 4, 2013 by Humair

Today Dell released FTOS 9.1 for its Z9000 and S4810 data center switches. A lot of cool features have been added to the ubiquitous switch operating system, perhaps most notably the support for OpenFlow. However, in this blog I will … Continue reading →

Posted in Dell, Dell Force10, Expect, Labs, Network Architecture, Networking, Tcl | Tagged automated configuration, bare metal provisioning, Bare Metal Provisioning 3.0, BMP, BMP 3.0, Dell, Dell Force10, Dell Open Automation Framework, Expect, Force10, FTOS, FTOS 9.1, network automation, Open Automation Framework, OpenFlow, Tcl | Leave a comment

Connecting Dell PowerEdge M I/O Aggregator with Dell Force10 S4810 and Cisco Nexus 5548UP

Posted on February 11, 2013 by Humair

The Dell PowerEdge M I//O Aggregator is a slick blade switch that plugs into the Dell PowerEdge M1000e chassis and requires barely any configuration/networking knowledge. Think of it as an advanced layer 2 switch that provides expandable uplink connectivity. The … Continue reading →

Posted in Cisco, Dell, Dell Force10, Force10 Networks, Labs, Network Architecture, Networking, Technology | Tagged 40 GbE, 5548 switch, 5548UP switch, Blade Chassis, blade switch, Chassis Management Controller, Cisco, Cisco Nexus, Cisco Nexus 5548, Cisco Nexus 5548UP, CMC, Dell, Dell Blade Server, Dell Blade Servers, Dell Force10, Dell Force10 S4810, Dell Force10 S4810 switch, Dell I/O Aggregator, Dell M1000e, Dell PowerEdge, Dell PowerEdge M I/O Aggregator, Dell PowerEdge M1000e, Dell S4810, Dell S4810 switch, Dell Server Blade Chassis, Force10, Force10 Networks, Force10 Networks S4810, Force10 Networks S4810 switch, Force10 S4810, Force10 S4810 switch, I/O Aggregator, I/O Aggregator blade switch, M1000e, Nexus 5548, Nexus 5548UP, Nexus 5548UP switch, PowerEdge, PowerEdge I/O Aggregator, PowerEdge I/O Aggregator blade switch, PowerEdge M1000e, S4810 switch, Server Blade Chassis, Twinax, Twinax breakout cable, Twinax breakout cables | 2 Comments

Understanding and Implementing Flow Control on Dell Force10 Switches

Posted on January 28, 2013 by Humair

Ethernet flow control allows for a receiving node to temporarily stop the transmission of data from the sending node. As defined by IEEE 802.3x this is accomplished via the PAUSE frame.

Posted in Dell Force10, Force10 Networks, Labs, Networking, Servers, Technology | Tagged 01-80-C2-00-00-01, 01:80:C2:00:00:01, 802.1Qbb, 802.3x, 802.3x flow control, Class of Service, converged network, converged networks, CoS, DCB, Dell, Dell Force10, Dell Force10 S50N, Dell S50N, Ethernet Pause Frame, Flow Control, Force10, Force10 Networks, Force10 S50N, IEEE 802.1Qbb, IEEE 802.3x flow control, network congestion, pause, PAUSE frame, PAUSE frame capture, PAUSE frame propogation, pause traffic, PFC, priority-based flow control, propogate PAUSE frame, QoS, Quality of Service, wireshark, Wireshark PAUSE frame, Wireshark PAUSE frame capture | 2 Comments

Dell Force10 – Layer 2 Multipathing via Virtual Link Trunking (VLT)

Posted on December 18, 2012 by Humair

In this blog I use one Dell Force10 S50N [FTOS 8.4.2.7] and three Dell Force10 S4810 switches [FTOS 8.3.12.1] to demonstrate Dell Force10’s layer 2 mulipathing technology called Virtual Link Trunking (VLT). With VLT, you can create a LAG for … Continue reading →

Posted in Dell Force10, Force10 Networks, Labs, Networking, Technology | Tagged 10 gig, 10GbE, 40 gig, 40GbE, bare metal provisioning, BMP, Brocade, Cisco, Dell, Dell Force10, Dell Force10 S4810, Dell Force10 S50N, Force10 Networks, Force10 S4810, Force10 S50N, FTOS, Juniper, LACP, Link Aggregation Control Protocol, MCT, MEC, mulipathing, Multi-Chassis Trunking, Multichassis EtherChannel, non-blocking, reload-type, S4810, S50N, Shortest Path Bridging, Spanning Tree Protocol, SPB, stack port, stack-group, STP, Transparent Interconnection of Lots of Links, TRILL, Virtual Chassis, Virtual Link Trunk, Virtual Link Trunking, Virtual Port Channel, VLT, VLT interconnect, VLTi, vPC | 11 Comments

Multi-Area OSPF in a Mixed Cisco and Dell Force10 Environment

Posted on November 20, 2012 by Humair

In this lab I use one Cisco 2621XM [IOS 12.4(2)T], one Cisco 2621 [IOS 12.3(18)], one Cisco 3660 [IOS 12.1(1)T], one Cisco 3640 [IOS 12.1(2)T], one Cisco 3550-24PWR-SMI [IOS 12.2(44)SE6], one Dell Force10 S60 [FTOS 8.3.3.7], and one Dell Force10 … Continue reading →

Posted in Cisco, Dell Force10, Force10 Networks, Labs, Networking, Protocols, Technology | Tagged 2621, 2621XM, 3550-24PWR-SMI, 3640, 3660, ABR, Area Border Router, Area Border Routers, Cisco, Cisco 2621, Cisco 2621XM, Cisco 3550-24PWR-SMI, Cisco 3640, Cisco 3660, Dell, Dell Force10, Dell Force10 S50N, Dell Force10 S60, Force10, Force10 Networks, Force10 S50N, Force10 S60, multiarea ospf, Open Shortest Path First, OSPF, ospf neighbor, OSPF Neighbors, S50N, S60, Type 3 LSAs | Leave a comment