Author Archives: Humair
Network Virtualization with Dell and VMware NSX [Video]
Check out my latest Dell Networking video on Network Virtualization with Dell and VMware NSX. You can view it on the Dell VMware wiki site, the Dell YouTube channel, or see the video embedded below via direct link.
Creator of Perl, Larry Wall, on Programming Languages
Creator of Perl, Larry Wall, when asked, “What are the five programming languages everyone, even non-programmers, should know about and why?”:
EMEA DEF HOL Labs – Get Hands-on Experience with Dell Networking, Servers, and Storage
EMEA Dell Enterprise Forum (DEF) kicked off this week in Frankfurt, Germany. Great venue with tons of information and training for Dell customers and partners. Make sure to stop by the Hands-on labs in the Skyloft. I will be there … Continue reading
Automating VLAN Configuration on Dell FTOS Switches via GVRP
GARP VLAN Registration Protocol (GVRP) is a standards-based protocol defined in the IEEE 802.1Q specification that provides for automatic VLAN configuration on switches. The Generic Attribute Registration Protocol (GARP) is used by switches supporting GVRP to register/de-register attribute values such … Continue reading
Redistribution of EIGRP and OSPF in a Hybrid Cisco/Dell Network
Check out my latest blog on networkpros.org where I demonstrate redistributing EIGRP routes into OSPF and redistributing OSPF routes into EIGRP in a mixed Cisco IOS and Dell FTOS environment. Of course only the Cisco switches are running EIGRP and … Continue reading
Dell MXL and FC Flex IOM: Enabling Network Convergence via FCoE [Video]
As you know from my prior blog, blog, the Dell FC Flex IOM adds 4 x FC ports (8 x FC ports with 2 modules) to the Dell MXL/IOA blade switch and transforms it into a NPIV Proxy Gateway (NPG) … Continue reading
Writing Useful Batch Scripts for Windows
An often overlooked utility in Windows is the use of batch scripts.A batch script is nothing but a text file with the ‘.bat’ extension containing a series of commands to be executed by the Windows command interpreter. Along with calling … Continue reading
Dell PowerEdge M1000e – FlexAddressing
Let’s say you have a Dell PowerEdge M1000e chassis populated with Dell blade servers with CNAs. Let’s also assume you enable FCoE on the CNA and utilize it for LAN and SAN traffic. What if you were to use the … Continue reading