Posts Tagged ‘FCoE Transit’

FCoE with Dell S5000 Converged Switch and Dell MXL Blade Switch [Video]

Wednesday, September 18th, 2013

Check out the latest Dell S5000 converged switch video which demonstrates FCoE with the Dell S5000 converged switch and the Dell PowerEdge M1000e chassis w/ MXL blade switch. The Dell S5000 switch is configured in NPIV Proxy Gateway mode and the Dell MXL blade switch is configured for FCoE Transit. Additionally, the FCoE and LAN connectivity is tested by sending LAN and SAN traffic from the Dell PowerEdge M620 blade server. Multipathing over dual fabrics is also demonstrated by logging into the Fibre Channel switches and observing the FC traffic passing over both fabrics. Just see the second video posted on the following page on Dell’s website here, Dell Tech Center YouTube channel here, or just see the video directly below. (more…)

Twitt

FCoE Transit with the Dell PowerEdge M I/O Aggregator Blade Switch

Thursday, August 1st, 2013

PowerEdge M I/O AggregatorThe Dell PowerEdge M I/O Aggregator (IOA) blade switch is pretty cool. It looks similar to the Dell MXL blade switch and even uses the same FlexIO modules in its two FlexIO module slots. As with the Dell MXL switch, it also has 32 internal ports for blade servers. The main difference from the MXL switch is that the IOA is a layer 2-only switch meant to be deployed as-is or ‘zero-touch’ from the engineer. It is geared more towards the server admin rather than the network admin as it requires little network configuration knowledge and is pretty much plug-and-play! In this blog I talk specifically about FCoE transit on the Dell IOA blade switch [FTOS 8.3.17.4]. (more…)

Twitt