Posts Tagged ‘Dell S4810 switch’

Firewalling & Micro-segmentation with VMware NSX

Monday, December 8th, 2014

One very exciting and strong use case for VMware NSX is advanced security. VMware NSX has some inherent security features and also allows for 3rd party security appliance integration. In this blog, I’ll briefly discuss the firewalling and micro-segmentation capabilities of VMware NSX-vSphere. (more…)

Twitt

Deploying a Dell PowerEdge M1000e Chassis with Dell Blade Servers and Dell MXL Blade Switches

Monday, June 10th, 2013

In this blog I demonstrate how to setup a Dell M1000e chassis with a Dell PowerEdge M620 server and two Dell MXL blade switches [FTOS 8.3.16.2]. The Dell M1000e chassis is part of a larger network composed of three Dell S4810 switches [FTOS 9.1]. Windows Server 2008 R2 Enterprise is installed on the server. Below is the network diagram for this lab. (more…)

Twitt

Connecting Dell PowerEdge M I/O Aggregator with Dell Force10 S4810 and Cisco Nexus 5548UP

Monday, February 11th, 2013

Dell PowerEdge M I/O AggregatorThe Dell PowerEdge M I//O Aggregator is a slick blade switch that plugs into the Dell PowerEdge M1000e chassis and requires barely any configuration/networking knowledge. Think of it as an advanced layer 2 switch that provides expandable uplink connectivity. The base blade comes with 2 x 40 GbE ports that by default are configured as 8 x 10 GbE ports. If desired, these ports can also be used as 40 GbE stacking ports. The Dell PowerEdge M I/O Aggregator also provide 32 internal 10 GbE connections for Dell blade servers you can install in the Dell PowerEdge M1000e chassis. If quarter-height blade servers are used, the M1000e can support up to 32 servers. This is pretty cool, not only in terms of functionality, but also in terms of the consolidation and the mess of Ethernet/power cables avoided by not using standalone components. (more…)

Twitt